Electrician at Veolia

Position Electrician
Posted 2025 August 07
Expired 2025 September 06
Company Veolia
Location Agawam, MA | US
Job Type Full Time

Job Description:

Latest Job Information from Company Veolia as position Electrician. If Job Vacancy Electrician in Agawam, MA matches your criteria, please send your latest application/CV directly through the latest and most updated job site Jobkos.

Every job may not be easy to apply for, because as a new candidate / prospective employee must meet several qualifications and requirements according to the criteria sought by the Company. Hopefully the career information from Veolia as the position Electrician below matches your qualifications.

Company Description

A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent.

Please visit our website for more information - www.veolianorthamerica.com

Job Description

Pay Rate: $37.52 per hour.

Position Purpose:

Performs a variety of maintenance functions at water production and related facilities Engages in electrical installation projects and maintenance of existing electrical, electronic, instrumentation and controls, and service equipment. Performs complex circuit diagnosis and troubleshooting. Works with other departments of the Company as assigned.

Primary Duties/Responsibilities:

  • Interprets plans and specifications for projects.
  • Performs installation of 480 volt and lower voltage circuits for power and lighting.
  • Works independently or with contractors to maintain high voltage circuits.
  • Installs electrical and electronic equipment according to the plans and specifications.
  • Prepares and updates drawings.
  • Lays out work to be performed after diagnosing and troubleshooting problems.
  • Determines and performs necessary repairs to electric power and lighting circuits and electrical and electronic equipment.
  • Performs tests for temperature vibration, noise, current, voltage, insulation level, and calibration as required.
  • Adjusts, lubricates, and repairs small motors, motor controllers, telemetry equipment, PLC equipment, metering equipment, water treatment equipment, transmission and distribution equipment including pumps, standby engines, heating and ventilation equipment, bleeder valves, motor wells, battery sets and chargers, and generators.
  • Handles materials and equipment such as electric, electronic, and environmental test equipment, portable hand and electric tools, and pumping units, etc.
  • Ensures the documentation of equipment maintenance history through the use of the MMS System.
  • Works independent of or with operation's division personnel, contractors or engineering as required.
  • Submits requisitions for tools and materials; ensures inventory used is documented in the MMS System.
  • Documents vehicle and equipment use.
  • Develops or modifies Standard Maintenance Procedures (SMP's).
  • Assists in training personnel as assigned.
  • Troubleshoots and repairs Scada system problems at assigned facilities.
  • Performs routine checks on Scada system alarms to ensure function.

Work Environment:

  • Occasionally exposed to wet or humid conditions (non-weather), fumes or airborne particles, and toxic or caustic chemicals.
  • Works near moving mechanical parts.
  • Work in high and precarious places.
  • Exposed to extreme outdoor weather conditions such as ice and snow.
  • Risk of electrical shock and vibration.
  • Excessive plant noise.

Qualifications

Education/Experience/Background:

  • A high school diploma or general education degree (GED) is required.
  • Completion of one year (24 credit hours) of a technical degree from an accredited program at a recognized school of engineering and technology or technical institute or equivalent in electronics or electricity.

Knowledge/Skills/Abilities:

  • Ability to undertake additional education to update skills as needed.
  • Knowledge of the National Electric Code.
  • Knowledge of medium and low voltage power and lighting circuits.
  • Knowledge of programmable logic controllers.
  • Knowledge of Company safety and environmental procedures.
  • Ability to operate a personal computer and appropriate software.
  • Ability to participate in the Company's Respiratory Protection Program.
  • Knowledge of applicable OSHA standards.
  • Ability to maintain responsible use and care of hand tools furnished by the Company.
  • Ability to read and interpret blueprints and wiring schematics.
  • Ability to drive a vehicle.
  • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
  • Knowledge and understanding of Scada system operations.
  • Ability to diagnose control failures related to power or communications.
  • Leadership ability and dependability in performance of duties when working alone.
  • Ability to read and interpret operations and maintenance instructions and procedure manuals.
  • Ability to work with RCM maintenance program.

Required Certification/Licenses/Training:

  • Must have a valid driver's license.
  • Must have a Massachusetts's Journeyman or Master Electrician license (MA).

Physical Requirements:

  • Should be available outside of normal working hours for emergency response. Frequently sits, talks or hears.
  • Occasionally stands, walks, uses hands to finger, handle, or feel; reach with hands and arms and climbs or balances, stoops, kneels, crouches, or crawls and tastes or smells.
  • Reading drawings, driving company vehicle, troubleshooting equipment, distinguishing difference of wire colors, using computer, taking notes, and planning work assignments requires close vision, distance, color, peripheral vision, depth perception and the ability to adjust focus.
  • Lifts up to fifty pounds routinely and 100 pounds occasionally with assistance.

Additional Information

Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.

We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Info:

  • Company: Veolia
  • Position: Electrician
  • Work Location: Agawam, MA
  • Country: US

How to Submit an Application:

After reading and understanding the criteria and minimum qualification requirements explained in the job information Electrician at the office Agawam, MA above, immediately complete the job application files such as a job application letter, CV, photocopy of diploma, transcript, and other supplements as explained above. Submit via the Next Page link below.

Next Page »

Similar Job Vacancies

  CNC Lathe Machinist (2nd shift) di Bestlogic Staffing

Posted: 2025 September 19
Position: CNC Lathe Machinist Shift: 2nd | Hours: 3 PM - 11 PM Type: Full-Time | Mode: Direct Placement Pay Scale: $25 - 32/hr | Industry: Manufacturing Our Cl
Company: Bestlogic Staffing
Location: Agawam, MA

  Occupational Therapist School Setting - Feeding Hills, MA di Soliant

Posted: 2025 September 08
A school-based Occupational Therapist is needed for a K-12 educational setting located in Feeding Hills, MA. This position is a contracted role for the upcoming
Company: Soliant
Location: Agawam, MA

  Electrician di Veolia

Posted: 2025 August 07
Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecuti
Company: Veolia
Location: Agawam, MA

  Senior Bioanalytical Study Manager di PPD Latin America

Posted: 2025 July 09
Location Cambridge, Massachusetts, United States of America Job Id R-01315147 Seeking a strategic leader with 5-8 years of project management experience in
Company: PPD Latin America
Location: Agawam, MA