FORKLIFT (Reach Truck) Freezer Warehouse - 3rd shift at GREENSBORO WAREHOUSE

Job Description:

Latest job information from GREENSBORO WAREHOUSE for the position of FORKLIFT (Reach Truck) Freezer Warehouse - 3rd shift. If the FORKLIFT (Reach Truck) Freezer Warehouse - 3rd shift vacancy in Greensboro, NC matches your qualifications, please submit your latest application or CV directly through the updated Jobkos job portal.

Please note that applying for a job may not always be easy, as new candidates must meet certain qualifications and requirements set by the company. We hope the career opportunity at GREENSBORO WAREHOUSE for the position of FORKLIFT (Reach Truck) Freezer Warehouse - 3rd shift below matches your qualifications.

Summary: 

Responsible for placing received pallets into appropriate reserve or selection slot. Drive electric powered industrial truck equipped with lifting devices such as forklift to push, pull, lift, stack, tier, or move products, equipment, or materials by performing the following duties.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

• M

  ove levers and press dead man pedals to drive truck and control movement of lifting apparatus.

• Position forks under, over, or around loaded pallets, boxes, products, or materials, and transports load to designated area.

• Unload and stack product by raising and lowering lifting device.

• Load or unload materials onto or off of pallets (selection slots only).

• Reference RFS computer and/or appropriate computer printout to find location where pallet needs to be placed.

• Remove needed product from overhead slot and places in appropriate selecting slot using the standard methods for replenishment.

• Record appropriate information in RFS computer concerning completion of put away.

• Remove plastic wrap from selection slots.

• Separate chep, regular, and plastic pallets from slots using forklift.

• Keep work area clean and clear of debris.

• Place "lost" cases in correct locations as needed.

• Follow company's safety policies and procedures.

• Perform other duties as requested by supervisor

Competency:

To perform the job successfully, an individual should demonstrate the following competencies:

• Customer Service - Responds promptly to customer needs; Responds to requests for service and assistance; Meets commitments.

• Interpersonal - Maintains confidentiality; Keeps emotions under control; Remains open to others' ideas and tries new things.

• Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings.

• Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests.

• Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information.

•  Quality Management - Demonstrates accuracy and thoroughness. Business Acumen - Understands business implications of decisions; Displays orientation to profitability.

• Cost Consciousness - Works within approved budget; Conserves organizational resources.

• Diversity - Shows respect and sensitivity for cultural differences; Promotes a harassment-free environment.

• Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values.

• Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values.

• Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.

• Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time.

• Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments.

•  Initiative - Volunteers readily; Asks for and offers help when needed.

• Planning/Organizing - Prioritizes and plans work activities.

• Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.

• Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

• Quantity - Completes work in timely manner; Works quickly.

• Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions ; Uses equipment and materials properly.  

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education/Experience:

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Language Ability:

Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other associates of the organization.

Math Ability:

Ability to add, subtracts, multiply, and divide in units of measure, using whole numbers, common fractions, and decimals.

Reasoning Ability:

Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Computer Skills:

To perform this job successfully, an individual should have knowledge of forklift RF unit, VLM time system, Triceps scan station.

Certificates and Licenses:

Must be able to pass forklift certification

Other Skills and Abilities:

Must be 18 years of age

Other Qualifications:

Must comply with Company dress code

Supervisory Responsibilities:

This job has no supervisory responsibilities.

Work Environment:

The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the associate is regularly exposed to wet or humid or cold conditions (non-weather); work near moving mechanical parts;  cold and extreme warmth (weather)

The noise level in the work environment is usually moderate to loud.

Physical Demands:

The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The associate must regularly lift and /or move up to 80 pounds. Specific vision abilities required by this job include Close vision and Distance vision. While performing the duties of this Job, the associate is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The associate is frequently required to stoop, kneel, crouch, or crawl. The associate is occasionally required to sit.

Job Info:

• Company: GREENSBORO WAREHOUSE
• Position: FORKLIFT (Reach Truck) Freezer Warehouse - 3rd shift
• Work Location: Greensboro, NC
• Country: US

How to Submit an Application:

After reading and understanding the criteria and minimum qualification requirements explained in the job information FORKLIFT (Reach Truck) Freezer Warehouse - 3rd shift at the office Greensboro, NC above, immediately complete the job application files such as a job application letter, CV, photocopy of diploma, transcript, and other supplements as explained above. Submit via the Next Page link below.